How To Measure Trailer Axle Alignment. Both dimensions should be the same. Welcome to a new installment of trailer tech!

How To Align Your Trailer Axles with Lippert Correct Track from www.youtube.com

Camber refers to the measurement of a vehicle’s wheels vertical alignment with the ground. If your axle is not constructed this way, proceed to step 3. Do the same on both sides of the trailer to complete your trailer axle alignment.

Once You Have The Required Tools, It’s Time To Measure The Trailer Alignment.

Both dimensions should be the same. Then take the same measurement to the other wheel center. Measuring properly to check trailer tire alignment requires parking your trailer on a flat surface.

Compare The Distances Between The Right Wheels And The Left Wheels.

Measurement # 2 = spring center. • properly position the trailer. Use your same straightedge as before:

If They Are Not That Is Another Indication Of Worn Suspension Though It Could Be A Bent Axle.

If your measurements differ by more than an 1/8” of an inch, your axles are most likely misaligned. Do the same on both sides of the trailer to complete your trailer axle alignment check. These axles have receiving holes in a flat metal bar welded to the axle to keep the axles aligned.

See also  Kelley Blue Book Snowmobile Trailer Values

This Is Especially True For Off Road Trailers, Like Atv Trailers.

The driver side has a difference of 1/8. If your axle is not constructed this way, proceed to step 3. Measure and note the distance between the front wheel and rear wheel on either side of the trailer, if your trailer has a second axle.

Camber Refers To The Measurement Of A Vehicle’s Wheels Vertical Alignment With The Ground.

Next measure from the straightedge to the frame in back of the wheel and compare the two measurements. They should be identical or within 1/8 of an inch, give or take 1/16 of an inch. Remove your boat from the trailer to make this repair much easier.

Leave a Reply

Your email address will not be published.